Scope of delivery: 1x MT-SYSTEM: Printbed ScraperAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

The MT-SYSTEM trays are the base for individual arrangement of your tools. They are (currently) available in these sizes: 125 x 90mm (size M)245 x 90mm (size L)The trays can be used as a stand alone part to receive screw drivers and other stuff OR to hold different inlays which is much cooler! The inlays are available in different widths so you can pic an individual number as well as width of inlays until the tray is fully equipped. It is an easy and simply way to arrange your stuff as you like/need it. Have fun! Scope of delivery:1x MT-SYSTEM Tray (size M)2x Screw M4x8mm2x Slot Nut M4Accessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

The MT-SYSTEM trays are the base for individual arrangement of your tools. They are (currently) available in these sizes: 125 x 90mm (size M)245 x 90mm (size L)The trays can be used as a stand alone part to receive screw drivers and other stuff OR to hold different inlays which is much cooler! The inlays are available in different widths so you can pic an individual number as well as width of inlays until the tray is fully equipped. It is an easy and simply way to arrange your stuff as you like/need it. Have fun!Scope of delivery:1x MT-SYSTEM Tray (size L) (Mounting material/accessories available separately, see below) 2x Screw M4x8mm 2x Slot Nut M4 Accessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

As many users like to hear their favourite music when working we designed this passive soundbox that can easily be mounted on every 20x40mm aluminium carrier profile. It is useable with cell phones with up to 13,5mm thinkness and max. 85mm width. The total width of the soundbox is 100mm. A further advantage is the little window in the bottom where you can insert your charging cable. You can hear a clear improvement of the musics quality, volume and direction. Moreover you have your phone always in sight with regard to incoming messages and calls. Hands-free talking works also very well. The soundbox is available in two versions: Standard version: Cell phone stands 90° vertically. Sloped version: Cell phone is sloped 10° backwards for better useability and readability etc. Also the cell phone is less shaking when tipping onto the display! Scope of delivery: 1x MT-SYSTEM Soundbox for Cell Phones 2x Screw M4x8mm 2x Slot nut M4 Delivery takes place in individual parts. Accessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Made for milling cutters oder other stuff up to 8mm shank diameter. There is also a little useful compartment in the front. This inlay is (currently) available with these hole diameters: 8mm 10mm This size S inlay (60x85mm) is useable with the MT-SYSTEM trays in size M/L. Scope of delivery: 1x MT-SYSTEM Inlay S: Milling Cutter 8mmAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Made for milling cutters oder other stuff up to 10mm shank diameter. There is also a little useful compartment in the front. This inlay is (currently) available with these hole diameters: 8mm 10mm This size S inlay (60x85mm) is useable with the MT-SYSTEM trays in size M/L. Scope of delivery: 1x MT-SYSTEM Inlay S: Milling Cutter 10mmAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Useful little shell WITH LID to take care of screws, bolts, nuts and other smaller stuff and keeps it aways from (most) dust. This size S inlay (60x85mm) is useable with the MT-SYSTEM trays in size M/L. Scope of delivery: 1x MT-SYSTEM Inlay S: Case with lidAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

We don’t know exactly what it is good for 😊 …but it looks nice… even when printed in BLACK and placed into a YELLOW tray (see pics)! This size S inlay (60x85mm) is useable with the MT-SYSTEM trays in size M/L. Scope of delivery: 1x MT-SYSTEM Inlay S: Case with hex bottomAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Useful little shell to take care of screws, bolts, nuts and other smaller stuff. This size S inlay (60x85mm) is useable with the MT-SYSTEM trays in size M/L. Scope of delivery: 1x MT-SYSTEM Inlay S: Case (Mounting material/accessories available separately, see below) Accessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

This holder has been designed to take care of - up to 12 drills with up to 10mm diameter - up to 6 milling cutters or other stuff with shaft diameters up to 10mm - anything else in the front compartment This size M inlay (120x85mm) is useable with the MT-SYSTEM trays in size M/L. Scope of delivery: 1x MT-SYSTEM Inlay M: Multiuse Accessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Useful shell to take care of screws, bolts, nuts and other stuff. This size M inlay (120x85mm) is useable with the MT-SYSTEM trays in size M/L. Scope of delivery: 1x MT-SYSTEM Inlay M: CaseAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Stores up to 20x 1/4“ nuts. Available for different nut sizes. This size M inlay (120x85mm) is useable with the MT-SYSTEM trays in size M/L. Scope of delivery: 1x MT-SYSTEM Inlay M: 1/4" Nut holderAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Stores up to 6x 1/2“ nuts. Available for different nut sizes. This size M inlay (120x85mm) is useable with the MT-SYSTEM trays in size M/L. Scope of delivery: 1x MT-SYSTEM Inlay M: 1/2" Nut holderAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Assortment inlay for 96x hex bits and 2x trays for universal use. The design of the bit compartment is ELEVATING which means that the last 4 rows are rising 1mm more than the row before. So the bits in the very back position are higher than the bits in the first row to give the user a much more better overview about his tools. This size L inlay (240x85mm) is useable with the MT-SYSTEM trays in size L. Scope of delivery: 1x MT-SYSTEM Inlay L: Assortment with bit holder and 2 traysAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Assortment inlay for universal use. This size L inlay (240x85mm) is useable with the MT-SYSTEM trays in size L. Scope of delivery: 1x MT-SYSTEM Inlay L: Assortment with 8 traysAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Assortment inlay for universal use. This size L inlay (240x85mm) is useable with the MT-SYSTEM trays in size L. Scope of delivery: 1x MT-SYSTEM Inlay L: Assortment with 7 traysAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Assortment inlay for universal use. This size L inlay (240x85mm) is useable with the MT-SYSTEM trays in size L. Scope of delivery: 1x MT-SYSTEM Inlay L: Assortment with 3 trays lengthwiseAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Assortment inlay for universal use. This size L inlay (240x85mm) is useable with the MT-SYSTEM trays in size L. Scope of delivery: 1x MT-SYSTEM Inlay L: Assortment with 3 trays crosswiseAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Assortment inlay for universal use. This size L inlay (240x85mm) is useable with the MT-SYSTEM trays in size L. Scope of delivery: 1x MT-SYSTEM Inlay L: Assortment with 2 trays lengthwiseAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Assortment inlay for universal use. This size L inlay (240x85mm) is useable with the MT-SYSTEM trays in size L. Scope of delivery: 1x MT-SYSTEM Inlay L: Assortment with 2 trays crosswiseAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Assortment inlay for universal use. This size L inlay (240x85mm) is useable with the MT-SYSTEM trays in size L. Scope of delivery: 1x MT-SYSTEM Inlay L: Assortment with 10 traysAccessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

Single plate with one hook of 12mm length. The hook is mounted to the plate by a M4 screw from behind and is available in different length: - 12mm - 22mm - 30mm For individual use. Perfect to hold - combination wrenches - smaller pliers / wire cutters - other stuff with a hole to put on a hook 😊 There are also mounting plates available in 125mm/245mm width which can carry more than ONE hook. Scope of delivery: 1x MT-SYSTEM Universal Hook (single) 1x Screw M4x10mm2x Screw M4x8mm2x Slot nut M4 Delivery takes place in individual parts. Accessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

This magnetic sledge holder uses a 20x5mm round magnet to hold your tool in place. The magnet can be inserted (and possibly glued) from behind. A single Neodym magnet holds a 500g sledge even horizontally in place (see pictures)! Available in different widths for different kinds of hammers. Scope of delivery: 1x MT-SYSTEM: Sledge/Hammer holder 125mm 1x Magnet 20x5mm 2x Screw M4x8mm 2x Slot nut M4 Delivery takes place in individual parts. Accessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.

This magnetic sledge holder uses a 20x5mm round magnet to hold your tool in place. The magnet can be inserted (and possibly glued) from behind. A single Neodym magnet holds a 500g sledge even horizontally in place (see pictures)! Available in different widths for different kinds of hammers. Scope of delivery: 1x MT-SYSTEM: Sledge/Hammer holder 100mm 1x Magnet 20x5mm 2x Screw M4x8mm 2x Slot nut M4 Delivery takes place in individual parts. Accessories shown are for illustrative purposes only and are not included in the scope of delivery unless otherwise stated. WHAT IS IT ALL ABOUT? We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. MOUNTING THE MT-SYSTEM: The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know. Link1: Construction profiles Link2: Screws Link3: Slot Nuts Link4: Magnets This article is a high quality and bio-degradeable 3D printing (PLA) MADE-IN-GERMANY. Other colors and customer-specific designs are possible at any time, regardless of the number of pieces. Due to production, slight color and structure deviations are possible. Do not store above approx. 50°C. Product may deform.